RB-54121 - Racing Beat front anti-sway bar brace blocks


Images May Not be Vehicle Specific. For Display Purposes Only.

Images Of This Specific Part Number

Non-Specific Images

Place Order Here

Part #: RB-54121
Notes: FRONT BAR CROSS BRACE KIT
Your Price: $115.00

This Item Also Available In

Part Number Price Notes & Specs
RB-54123 $40.00
VERSION WITH POWER STEERING

All Fitments

MAZDA
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1989 - 1995 MIATA ALL ALL ALL ALL ALL ALL FRONT BAR CROSS BRACE KIT W/ POWER STEERING

Product Description

Developed to stiffen any Miata chassis, this assembly proves most beneficial when using any relatively strong aftermarket sway bar, including Racing Beat’s tubular bar.

This kit both effectively minimizes chassis flex that reduces sway bar performance and eliminates possible cracking of the sway bar chassis mounts that results from repeated hard cornering.

This brace kit will fit all Miatas, but is intended primarily for 1989-1995 Miatas equipped with power steering. The routing of the rigid power steering lines on the 1989-1995 Miata required that we modify the brace support block to provide adequate clearance for these lines on this application.

Several years ago Racing Beat developed a Front Sway Bar Reinforcement Brace for the 1993 RX-7, which faced a similar problem. We found that we could adapt this part for the Miata by designing a brace that would tie both left and right sway bar chassis mounts together and adding additional support to the sway bar chassis mount.

Using the mounting bolts and retaining nuts supplied in our kit, a support bar is placed into position and tightened against the frame rail. As the retaining nuts are being tightened against the support block, the sway bar mounting bolt is being forced outward against the sway bar chassis mount. This support provides a very simple and extremely effective way to pre-load the sway bar mount — minimizing movement of the bracket and dramatically reducing the possibility of breakage.

Manufactured from hollow-core steel tubing and laser-cut end brackets, this brace is finished with a rust-proof white powder coat finish. Installation is accomplished by simply removing the sway bar mounting bolts and inserting the brace and support bar. Step-by-step instructions with fully detailed photos are included for easy installation.