Images May Not be Vehicle Specific. For Display Purposes Only.

Powerflex front lower arm bushings MAZDA

Select a Vehicle to See Parts for Your Car

Fitments

MAZDA
More Information Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
Click For More Info 1989 - 2005 MIATA ALL ALL ALL ALL ALL ALL LOWER WISHBONE FRONT (RACE)
Click For More Info 1989 - 2005 MIATA ALL ALL ALL ALL ALL ALL LOWER WISHBONE REAR (RACE)
Click For More Info 1989 - 2005 MIATA ALL ALL ALL ALL ALL ALL LOWER WISHBONE REAR (STREET)
Click For More Info 2006 - 2015 MX-5 MIATA ALL ALL ALL ALL ALL ALL FRONT LOWER WISHBONE (RACE)
Click For More Info 2006 - 2015 MX-5 MIATA ALL ALL ALL ALL ALL ALL FRONT LOWER WISHBONE (STREET)
Click For More Info 2006 - 2015 MX-5 MIATA ALL ALL ALL ALL ALL ALL REAR (RACE)
Click For More Info 2006 - 2015 MX-5 MIATA ALL ALL ALL ALL ALL ALL REAR (STREET)
Click For More Info 2016 - 2016 MX-5 MIATA ALL ALL ALL ALL ALL ALL FRONT
Click For More Info 2016 - 2016 MX-5 MIATA ALL ALL ALL ALL ALL ALL INSERTS FOR REAR
Click For More Info 2016 - 2016 MX-5 MIATA ALL ALL ALL ALL ALL ALL REAR
Click For More Info 1992 - 1995 RX-7 ALL ALL ALL ALL ALL ALL LOWER WISHBONE FRONT (RACE)
Click For More Info 1992 - 1995 RX-7 ALL ALL ALL ALL ALL ALL LOWER WISHBONE FRONT (STREET)
Click For More Info 1992 - 1995 RX-7 ALL ALL ALL ALL ALL ALL LOWER WISHBONE REAR (RACE)
Click For More Info 1992 - 1995 RX-7 ALL ALL ALL ALL ALL ALL LOWER WISHBONE REAR (STREET)
Click For More Info 2004 - 2011 RX-8 ALL ALL ALL ALL ALL ALL REAR (RACE)
Click For More Info 2004 - 2011 RX-8 ALL ALL ALL ALL ALL ALL REAR (STREET)
Click For More Info 2004 - 2011 RX-8 ALL ALL ALL ALL ALL ALL WISHBONE FRONT (RACE)
Click For More Info 2004 - 2011 RX-8 ALL ALL ALL ALL ALL ALL WISHBONE FRONT (STREET)

Product Description

Powerflex front lower arm bushings fit OEM part number N24334470.

Contents (parts per pack):

  • 2 x A Polyurethane parts
  • 2 x B Polyurethane parts
  • 2 x Stainless steel sleeves
  • 1 x Grease

Please read the complete fitting instructions and check package components before fitment.
These fitting instructions are to be used as a guide and in conjunction with workshop manual.

It is recommended that:

  • All work is carried out by a licensed technician
  • All safety precautions are adhered to
  • Wheel alignment is checked and adjusted as required after any suspension work
  • All fasteners must be torqued to manufacturers torque settings

Fitting Instructions:
1. Remove the original bushing from the front lower arm. Fig A.
2. Clean any dirt or debris from the arm bore. Fig A.
3. Fit new bushings into the arm with part A from outside (Front of the car) and part B from inside
(Rear of the car) of the arm. Fig B.
4. Apply some of the supplied grease into the bore of the bushings and push stainless steel sleeve into
the bore. Fig B.
5. Refit arm onto the car and tension all hardware to manufacturers recommended torque settings.