Images May Not be Vehicle Specific. For Display Purposes Only.

Track Dog Racing seat rails MAZDA

Select a Vehicle to See Parts for Your Car

Fitments

MAZDA
More Information Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
Click For More Info 1989 - 2005 MIATA ALL ALL ALL ALL ALL ALL DRIVER SIDE - LOW HEIGHT

Product Description

Track Dog Racing seat rails are made of high strength hot-rolled steel and jig-fabricated to an exact fit.

It bolts to the factory seat mounting location for simplicity and is a fixed rail to provide the lowest seat mounting possible.

The rail will require some modification and fitment by the user to finalize fore and aft location of the seat.

The rail is available in three different configurations:
• Driver side
• Passenger side
• Drivers side “low”

The driver’s side “low” provides an additional inch of head room but it requires removal of the rear seat mounts and prevents swapping back to the stock seat.

Other features include:
• Lowest possible mount outside of bolting seat directly to the floor
• Easy removal and installation makes it easy to service or bolt in on track days
• Direct bolt in
• Tested and used on Track Dog Racing’s personal cars with Ultra Shield seats (may work with other flat, bottom mount seats)

Why fixed mount? Any seat rail slider will add height.

If the user is adding racing seats like the Ultra Shield TDR Rally Sport, the goal typically is to get as low as possible below a roll bar or roll cage and to lower the center of gravity.

In Track Dog Racing’s experience, if they set the fixed rail to the ideal position the driver will not miss a seat slider.