MR-SRMK-NB - MiataRoadster steering rack mounts kits (NB)


Images May Not be Vehicle Specific. For Display Purposes Only.

Place Order Here

Part #: MR-SRMK-NB
Notes: $8 SHIPPING IN USA.
Your Price: $60.00

Specs

MATERIAL BLACK DELRIN (LEFT SIDE)
MATERIAL BLACK URETHANE (RIGHT SIDE)

All Fitments

MAZDA
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1999 - 2005 MIATA ALL ALL ALL ALL ALL ALL

Product Description

MiataRoadster steering rack mounts kits for the NB Miata improve steering feedback vs. the factory rubber mounts!

As used on our National Championships race car.

Exact same height as the factory mounts and do not change steering geometry, only the information transferred through the steering column to the driver.

Our one-piece driver’s side mounts are a superior design to Prothane kit’s steel tubes, which fit loosely around the bolts. Our mounts are machined to fit very snugly around the bolts to eliminate any movement or vibration.

KIT CONTENTS:

LEFT SIDE: (4) black Delrin half-bushings that press into the rack from each side in place of the rubber factory mounts

RIGHT SIDE: (1) black Urethane bushing from Prothane 12-701B

FASTENERS: (4) silver Zinc plated grade 10.9 Steel bolts, (4) Nord-Lock lock washers, and (4) thick silver Zinc plated Steel washers

Installation is easiest with the rack completely removed from the car, of course, but can be done on the car without having to disconnect any plumbing.

To access the rack, lift the car, remove the belly pan, disconnect the steering column U-joint, remove the four bolts holding the rack to the subframe, pull the rack away from the U-joint and subframe, press out the two old rubber bushings, and slip in the new Delrin ones.

On the right side, lift off the saddle bracket, peel off the old rubber bushing, and replace it with the new Urethane one.