FAB9-FIREWALL-ENG-HARNESS - Fab9 Tuning firewall engine harness connectors


Images May Not be Vehicle Specific. For Display Purposes Only.

Images Of This Specific Part Number

Non-Specific Images

Place Order Here

Part #: FAB9-FIREWALL-ENG-HARNESS
Your Price: $119.00

All Fitments

MAZDA
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1989 - 2005 MIATA ALL ALL ALL ALL ALL ALL

Product Description

Fab9 Tuning firewall engine harness connectors can be mounted to the firewall in order to route additional wiring for gauges or in place of your existing engine harness. It’s ideal for quick and easy engine removal or to simply clean up the look of your bay. These are very high quality connectors most commonly used in the aviation and military field.

Included:

  • (1) 1.5” Female 32 position firewall bulkhead mount (4) high current * 12 ga positions, (28) 14-22 ga positions
  • (1) 1.5” Male 32 position engine side connector
  • (40) Female crimp pins
  • (40) Male crimp pins
  • (1) Template for mounting

Installation will require a crimping tool that supports open barrel connectors 14-18, 20-22 AWG, available in a number of different form factors and prices ranging from $15 to $300. If you don’t plan on production wiring, consider the Greenlee PA1176 electrical terminal crimper.

These connectors are tested to meet demanding standards as follows:

  • 500 cycles of mating and unmating, with no mechanical or electrical defects
  • 10 g s peak,10-500 Hz with no physical damage, no loss of continuity
  • 40 g s peak, 3 axes, with no physical damage. 6 millisecond duration half-sine pulse, no loss of continuity >10 sec
  • High temperature endurance 1000 hours at 85°C (+185°F) insulation resistance > 250 hours at 120°C (+248°F)